Ficus virgata, also known as rubber trees or fig trees, are popular houseplants that can add a statement to any space. Consistency is key in caring for these finicky plants. They thrive in bright, indirect sunlight and should be watered moderately and consistently when the soil has dried about 1/3 of the way from the tops. Ficus virgata prefer rich and well-draining soil, and it’s best to repot them in the spring to avoid shock. They are highly sensitive to temperature changes and should be kept away from cold drafts or heating/cooling units. Ficus virgata should be kept out of reach of pets as they are toxic if ingested or come into contact with the skin, eyes, nose, or mouth.
To promote growth, shaking the Ficus trunk can simulate wind and stimulate thicker trunk and foliar growth. Preventative pest spraying is recommended, as Ficus virgata can be susceptible to spider mites. Care should be taken when working with Ficus roots to avoid disturbing the root ball too much.
Some popular Ficus virgata houseplants include Ficus altissima ‘Yellow Gem’, Ficus elastica ‘Burgundy’, Ficus pumila (Creeping Fig), Ficus benghalensis ‘Audrey’, Ficus lyrata (Fiddle Leaf Fig), Ficus elastica ‘Tineke’, and Ficus triangularis.
Key Takeaways:
- Consistency is key in caring for Ficus virgata plants, including providing moderate and consistent watering and avoiding temperature extremes.
- These plants thrive in bright, indirect sunlight and prefer rich, well-draining soil.
- They are toxic to pets and should be kept out of their reach.
- Shaking the Ficus trunk can help stimulate growth, and preventative pest spraying is recommended.
- Popular Ficus virgata houseplants include Ficus altissima ‘Yellow Gem’, Ficus elastica ‘Burgundy’, Ficus pumila (Creeping Fig), Ficus benghalensis ‘Audrey’, Ficus lyrata (Fiddle Leaf Fig), Ficus elastica ‘Tineke’, and Ficus triangularis.
Overview of Ficus virgata
Ficus virgata, also known as rubber trees or fig trees, are popular houseplants that can add a statement to any space. These plants are characterized by their large, glossy leaves and their ability to adapt to a variety of indoor conditions. Ficus virgata belong to the Moraceae family and are native to Southeast Asia. They have become popular as houseplants because of their attractive foliage and relatively low maintenance requirements.
The rubber tree gets its name from the white latex sap that exudes when its leaves or stems are damaged. This sap was historically used to produce natural rubber. Ficus virgata can grow to be quite tall, with some varieties reaching heights of 30 to 40 feet in their native habitats. However, when grown as houseplants, they are usually kept much smaller through regular pruning and shaping.
One popular variety of Ficus virgata is the Ficus elastica ‘Burgundy’. This plant has striking dark burgundy leaves that add a touch of elegance to any room. Another popular variety is the Ficus lyrata, commonly known as the fiddle-leaf fig. This plant features large, fiddle-shaped leaves that have made it a favorite among interior designers and plant enthusiasts alike.
| Scientific Name | Common Name |
|---|---|
| Ficus elastica | Rubber Tree |
| Ficus lyrata | Fiddle-Leaf Fig |
| Ficus benghalensis | Banyan Tree |
| Ficus pumila | Creeping Fig |
How To Grow Ficus virgata
Growing Ficus virgata plants successfully requires attention to certain key factors. Here are some essential steps and considerations to help you cultivate healthy and thriving specimens:
1. Light Requirements: Ficus virgata plants thrive in bright, indirect sunlight. Place them in a location where they can receive 3 to 6 hours of direct sunlight per day, but provide shade during the hottest parts of the day to prevent sun damage. If the plant doesn’t receive enough sunlight, the leaves may turn yellow or dry out. On the other hand, excessive sunlight can cause the foliage to become sparse or pale.
2. Watering: Consistency is key when it comes to watering Ficus virgata. Water the plants moderately and consistently when the top layer of soil has dried about 1/3 of the way from the tops. It’s important to check the soil moisture regularly and provide sufficient water to moisten all dry soil layers. Overwatering should be avoided as it can lead to root rot, while underwatering can cause the leaves to wilt or drop.
3. Soil Requirements: Choose rich and well-draining soil for your Ficus virgata plants. This will help prevent waterlogged conditions that can lead to root rot. Additionally, using a potting mix specifically formulated for indoor plants can provide the necessary nutrients for healthy growth. Proper soil moisture is crucial, so be sure to avoid compacted soil and provide adequate drainage.
4. Temperature and Humidity: Ficus virgata plants are sensitive to temperature changes and should be kept away from cold drafts or heating/cooling units. The ideal temperature range for these plants is between 59°F to 77°F. While they can survive in less humid conditions, they appreciate humidity. You can use a humidifier or place a pebble tray filled with water near the plant to increase moisture levels.
By following these guidelines and providing the right care and environment, you can ensure the successful growth of your Ficus virgata plants. Remember to monitor their needs regularly and make adjustments as necessary to promote their health and beauty.
| Common Name | Scientific Name |
|---|---|
| Rubber Tree | Ficus virgata |
| Fig Tree | Ficus virgata |
| Creeping Fig | Ficus pumila |
| Fiddle Leaf Fig | Ficus lyrata |
| Variegated Rubber Plant | Ficus Shivereana |
Propagation Tips for Ficus virgata
Propagating Ficus virgata plants can be a rewarding and cost-effective way to expand your collection or share your love for these stunning houseplants with others. Here are some useful tips to help you successfully propagate your Ficus virgata:
- Propagation Method: The most common method of propagating Ficus virgata is through stem cuttings. Choose a healthy stem with at least two nodes and remove any lower leaves. Dip the end of the cutting in rooting hormone to encourage root development.
- Potting Mix: Prepare a well-draining potting mix using a combination of perlite, peat moss, and vermiculite. This will provide the optimal growing medium for the new roots to develop.
- Rooting Process: Place the stem cutting in a small container filled with the potting mix, ensuring the nodes are covered. Keep the cutting in a warm and humid environment, away from direct sunlight. Mist the cutting regularly to maintain moisture levels.
- Root Development: After a few weeks, check for signs of root development by gently tugging on the stem. If you feel resistance, it means roots have started to form. Once the roots are well-established, you can transplant the cutting into a larger pot with a well-draining soil mix.
Remember to be patient and provide the right conditions for successful propagation. It may take several weeks or even months for your Ficus virgata cutting to develop roots. With time and care, you will soon have new, thriving plants to enjoy.
Expert Tip:
I find that using a clear plastic bag or a propagator with a misting system can greatly increase the success rate of Ficus virgata propagation. The enclosed environment helps maintain the necessary humidity levels for root development.
| Propagation Tips for Ficus virgata | |
|---|---|
| Propagation Method | Stem cuttings |
| Potting Mix | Perlite, peat moss, vermiculite |
| Rooting Process | Warm and humid environment |
| Root Development | Wait for resistance when tugging on stem |
Quick Care Overview for Ficus virgata
Ficus virgata, also known as rubber trees or fig trees, are popular houseplants that can add a statement to any space. Consistency is key in caring for these finicky plants. They thrive in bright, indirect sunlight and should be watered moderately and consistently when the soil has dried about 1/3 of the way from the tops.
Ficus virgata prefer rich and well-draining soil, and it’s best to repot them in the spring to avoid shock. They are highly sensitive to temperature changes and should be kept away from cold drafts or heating/cooling units. Ficus virgata should be kept out of reach of pets as they are toxic if ingested or come into contact with the skin, eyes, nose, or mouth.
To promote growth, shaking the Ficus trunk can simulate wind and stimulate thicker trunk and foliar growth. Preventative pest spraying is recommended, as Ficus virgata can be susceptible to spider mites. Care should be taken when working with Ficus roots to avoid disturbing the root ball too much.
| Popular Ficus virgata houseplants include: |
|---|
| Ficus altissima ‘Yellow Gem’ |
| Ficus elastica ‘Burgundy’ |
| Ficus pumila (Creeping Fig) |
| Ficus benghalensis ‘Audrey’ |
| Ficus lyrata (Fiddle Leaf Fig) |
| Ficus elastica ‘Tineke’ |
| Ficus triangularis |
Watering and Sunlight: In terms of watering the Sandpaper fig, it is not too picky and can be watered with common watering tools. The soil should be moistened evenly to provide all parts of the root system with water. Overwatering can be remedied by stopping watering, inspecting the roots for root rot, trimming affected roots, and repotting in well-draining soil. Underwatering can be resolved by watering more frequently. The watering frequency depends on the plant’s size and soil moisture, and it should be watered once the top layer of soil has dried out.
Sandpaper fig requires 3-6 hours of direct sunlight per day, with shade during the hottest parts of the day to prevent sun damage. If it doesn’t receive enough sunlight, the leaves may turn yellow or dry out. If it gets too much sunlight, the foliage may become sparse or pale. The watering frequency and volume should be adjusted depending on the plant’s growth stage, season, and environment. It is important to check the soil moisture regularly and provide sufficient water to moisten all dry soil layers.
Ficus Shivereana Care: Ficus Shivereana, a variegated rubber plant, has broad shiny oval leaves with sharp tips and requires regular watering, bright indirect sunlight, and well-draining soil. It can grow up to 2 meters indoors and needs pruning during the growing season to maintain its shape. The ideal temperature range is between 59°F to 77°F. Ficus Shivereana appreciates humidity and can survive in less humid conditions, but a humidifier or pebble tray can be used to provide additional humidity. The plant can be propagated through leaf or stem cuttings, and care should be taken to protect against its poisonous sap.
Overall, providing the right care and environment, including consistent light, water, and temperature, is essential for the health and growth of Ficus virgata and other varieties.
Ficus Virgata Light Requirements
Ficus virgata, also known as rubber trees or fig trees, thrive in bright, indirect sunlight. They require approximately 3-6 hours of direct sunlight per day to promote healthy growth. However, it is crucial to provide them with shade during the hottest parts of the day to prevent sun damage to their foliage.
If Ficus virgata does not receive enough sunlight, its leaves may turn yellow or dry out. On the other hand, if it gets too much sunlight, the foliage may become sparse or pale. It is important to strike the right balance and ensure the plants receive adequate light in a controlled manner.
To determine the ideal lighting conditions for your Ficus virgata, it is recommended to place them near a window that provides bright, filtered light. Avoid placing them in direct sunlight or in areas with extreme temperature fluctuations, such as near heating or cooling units.
Remember, Ficus virgata is a sensitive plant when it comes to lighting, so monitoring their response and adjusting their placement accordingly will help them thrive in your home or office.
| Light Requirement | Optimal Lighting Conditions |
|---|---|
| Brightness | Bright, indirect sunlight for 3-6 hours per day |
| Shade | Shade during the hottest parts of the day to prevent sun damage |
| Placement | Near a window that provides filtered light |
| Avoid | Direct sunlight and extreme temperature fluctuations |
By following these guidelines and providing the appropriate lighting conditions, you can ensure your Ficus virgata plants thrive and bring natural beauty to your indoor space.
Soil Requirements for Ficus virgata
When it comes to the soil requirements for Ficus virgata plants, it’s essential to provide a rich and well-draining medium. This will ensure optimal growth and prevent issues such as root rot. A good potting mix for Ficus virgata consists of a combination of peat moss, perlite, and sand. This mixture allows for proper drainage while retaining enough moisture for the plant’s roots.
Ficus virgata thrives in slightly acidic to neutral soil, with a pH range of 6.0 to 7.0. You can use a soil pH testing kit to monitor and adjust the pH level if necessary. If the soil is too alkaline, you can add organic matter like peat moss or compost to lower the pH. On the other hand, if the soil is too acidic, you can add lime to raise the pH.
It’s important to note that Ficus virgata is sensitive to overwatering, so avoid using heavy, compacted soils that retain too much water. This can lead to root rot and other moisture-related problems. Regularly check the soil moisture by inserting your finger about an inch deep into the soil. If it feels dry, it’s time to water the plant.
| Soil Requirements for Ficus Virgata | Summary |
|---|---|
| Soil Type | Rich and well-draining |
| Soil pH | 6.0 to 7.0 (slightly acidic to neutral) |
| Soil Moisture | Avoid overwatering, check soil moisture regularly |
By providing the right soil conditions, you can ensure that your Ficus virgata plant receives the necessary nutrients and moisture for healthy growth. Remember to regularly monitor the soil moisture and adjust watering accordingly. With proper soil care, your Ficus virgata will thrive and enhance the beauty of your indoor space.
Potting and Repotting Ficus virgata
When it comes to potting and repotting your Ficus virgata plants, following the right techniques is crucial for their overall health and growth. Here are some essential steps and tips to keep in mind:
- Choosing the right pot: Select a pot that is slightly larger than the current one, allowing room for the plant’s roots to spread. Ensure the pot has drainage holes at the bottom to prevent waterlogging.
- Preparing the soil: Use a well-draining soil mix that is rich in organic matter. This type of soil will provide the necessary nutrients and allow excess water to drain away from the roots.
- Removing the plant from its current pot: Gently loosen the soil around the plant’s root ball and carefully lift it out of the pot. Be cautious not to damage the roots.
- Inspecting the roots: Check the roots for any signs of damage or rot. Trim off any dead or diseased roots using clean and sterilized pruning shears.
- Repotting the plant: Place a layer of fresh soil in the new pot, creating a mound at the center. Position the plant on top of the mound, ensuring that the roots are spread out evenly. Fill the pot with soil, gently pressing it down to secure the plant.
- Watering and settling the plant: After repotting, thoroughly water the plant, allowing the water to soak through the soil and drain out from the bottom. This will help the plant settle into its new pot.
Remember that repotting should be done in the spring when the plant is actively growing. Avoid repotting too frequently, as Ficus virgata plants prefer to be slightly root-bound.
By following these potting and repotting guidelines, you can ensure your Ficus virgata plants have a stable and healthy environment to thrive in.
| Key Steps | Tips |
|---|---|
| Choose the right pot | Select a pot that is slightly larger than the current one and has drainage holes. |
| Prepare the soil | Use a well-draining soil mix that is rich in organic matter. |
| Remove the plant from its current pot | Loosen the soil and carefully lift the plant, avoiding root damage. |
| Inspect the roots | Trim any damaged or rotten roots using sterilized pruning shears. |
| Repot the plant | Position the plant on fresh soil and fill the pot, pressing down gently. |
| Water and settle the plant | Thoroughly water the plant after repotting to help it adjust. |
Pruning and Shaping Ficus virgata
Pruning and shaping Ficus virgata plants is an important aspect of their care to maintain their desired appearance and promote healthy growth. By following proper pruning techniques, you can help shape your plants and prevent them from becoming too leggy or unruly. Here are some tips to help you prune and shape your Ficus virgata:
- Choose the right time: The best time to prune Ficus virgata is in spring or early summer when they are actively growing. Avoid pruning during the winter months as the plants are dormant.
- Use clean and sharp tools: Before pruning, make sure to sterilize your pruning shears or scissors to minimize the risk of spreading diseases. Clean cuts will also promote faster healing.
- Remove dead or damaged branches: Start by identifying any dead or damaged branches and remove them at their base. This will improve the overall appearance of the plant and prevent potential diseases.
- Encourage bushier growth: To promote bushier growth, pinch or trim off the tips of new growth. This will stimulate branching and result in a fuller, more compact plant.
- Shape as desired: If you want to shape your Ficus virgata into a specific form, such as a tree or a bush, selectively prune branches to achieve the desired shape. Take it slow and step back frequently to assess the overall look.
Remember to always prune conservatively, as Ficus virgata plants can be sensitive to excessive pruning. It’s better to prune gradually over time rather than removing too much foliage at once. By following these pruning and shaping techniques, you can keep your Ficus virgata plants looking their best and encourage healthy growth.
| Common Pruning Mistakes | How to Avoid Them |
|---|---|
| Trimming too much foliage at once | Prune conservatively and gradually, allowing the plant to adjust to each pruning session |
| Pruning during the winter months | Wait until spring or early summer when the plant is actively growing |
| Using dull or dirty pruning tools | Sterilize your pruning tools and ensure they are sharp for clean cuts |
Expert Tip:
“When pruning Ficus virgata, it’s important to remember that they have a milky sap that can be irritating to the skin and eyes. Wear gloves and protective eyewear when handling the plant to avoid any potential skin irritation or eye discomfort.” – Mark Johnson, Horticulturist
Temperature and Humidity Requirements for Ficus virgata
Ficus virgata plants thrive in a specific temperature range and require adequate humidity to ensure their optimal growth. Maintaining the right temperature and humidity levels is crucial for the overall health and well-being of these popular houseplants.
The ideal temperature range for Ficus virgata is between 60°F to 75°F (15°C to 24°C). These plants are sensitive to extreme temperature fluctuations, so it’s important to keep them away from drafty areas or sudden temperature changes. Placing them near heating or cooling units can also cause stress to the plants. Keeping a consistent and moderate temperature will help the Ficus virgata thrive.
In terms of humidity, Ficus virgata plants prefer moderate to high levels of humidity. They are native to tropical regions and thrive in environments with humidity levels around 50% to 80%. To increase humidity levels, you can use a humidifier or place a tray filled with water near the plant. Misting the leaves occasionally can also help increase humidity. However, be careful not to mist excessively, as it can lead to fungal diseases.
To summarize, Ficus virgata plants prefer temperatures between 60°F to 75°F and moderate to high humidity levels around 50% to 80%. Providing the right conditions will help these plants thrive and maintain their health and beauty.
| Temperature | Humidity |
|---|---|
| 60°F to 75°F (15°C to 24°C) | Moderate to high humidity (50% to 80%) |
Watering, Fertilizing, and Pest Control for Ficus virgata
Proper watering, fertilizing, and pest control are crucial for the health and well-being of Ficus virgata plants. By following these guidelines, you can ensure that your plants thrive and remain pest-free.
Watering
When it comes to watering Ficus virgata, moderation is key. These plants prefer to be evenly moist but not waterlogged. Water your plant when the top inch of soil feels dry to the touch. Be sure to water thoroughly, ensuring that the water reaches all parts of the root system.
Overwatering can lead to root rot, so it’s important to avoid letting the plant sit in water. On the other hand, underwatering can cause leaf drop and stunted growth. Monitor the moisture levels closely and adjust your watering schedule accordingly.
Fertilizing
Ficus virgata plants benefit from regular fertilization during the growing season. Use a balanced, water-soluble fertilizer and follow the package instructions for application rates. Avoid over-fertilizing, as this can lead to nutrient burn and damage the plant’s roots.
It’s best to fertilize your Ficus virgata every 2-4 weeks during the spring and summer months when the plant is actively growing. Reduce or stop fertilizing during the winter months when growth slows down.
Pest Control
Like many houseplants, Ficus virgata can be susceptible to pests such as spider mites, mealybugs, and scale insects. Regularly inspect your plant for any signs of infestation, such as webbing, sticky residue, or small crawling insects.
To control pests, start by isolating the affected plant to prevent the infestation from spreading. Use a mild insecticidal soap or neem oil to treat the plant, following the product instructions carefully. Repeat the treatment as necessary until the pests are eliminated.
Preventive measures such as regularly wiping the leaves with a damp cloth and maintaining good plant hygiene can also help deter pests. Additionally, avoid overwatering and provide adequate airflow around the plant to reduce the risk of fungal diseases.
| Watering | Fertilizing | Pest Control |
|---|---|---|
| Water evenly, keeping soil moist but not waterlogged | Fertilize every 2-4 weeks during the growing season | Regularly inspect for pests and treat with insecticidal soap or neem oil |
| Avoid overwatering to prevent root rot | Reduce or stop fertilizing during the winter months | Maintain good plant hygiene and provide adequate airflow |
| Monitor soil moisture levels and adjust watering accordingly | Avoid over-fertilizing to prevent nutrient burn | Wipe leaves regularly to deter pests |
By following these watering, fertilizing, and pest control practices, you can ensure that your Ficus virgata plants remain healthy, vibrant, and free from pests. Remember to observe your plants closely and adjust your care routine as needed to provide the best possible conditions for their growth.
Common Problems with Ficus virgata
Ficus virgata, also known as rubber trees or fig trees, can be beautiful additions to any indoor space, but they can also present some common challenges. By understanding these potential issues, you can provide the necessary care to keep your Ficus virgata thriving and healthy.
Pest Infestation
One of the most common problems with Ficus virgata is pest infestation, particularly by spider mites. These tiny pests can cause significant damage to the leaves, sucking out the sap and leaving behind small web-like structures. To prevent infestation, regularly inspect your plants and keep them clean by wiping the leaves with a damp cloth. If you notice any signs of pests, treat the plant with an appropriate insecticidal soap or oil. Additionally, providing adequate humidity can help discourage these pests.
Leaf Drop
Another common issue with Ficus virgata is leaf drop. This can occur due to many factors, including overwatering, underwatering, or changes in environmental conditions. To prevent leaf drop, make sure to water your plant consistently and avoid letting the soil become too dry or waterlogged. Maintain a stable temperature and avoid placing the plant near drafts or heating/cooling units. If leaf drop occurs, it is often a sign that the plant is stressed, so try to identify and address the underlying cause.
Root Rot
Ficus virgata is susceptible to root rot if the soil remains overly wet for extended periods. This can happen if the plant is overwatered or if it is potted in poorly draining soil. To prevent root rot, ensure that your plant is potted in a well-draining soil mix and that the pot has drainage holes. Water the plant only when the top inch of the soil feels dry to the touch. If root rot is detected, remove the affected areas and repot the plant in fresh, well-draining soil.
| In summary: | How to address common problems with Ficus virgata |
|---|---|
| Pest Infestation | Regularly inspect the plant, keep leaves clean, and treat with insecticidal soap or oil if necessary. |
| Leaf Drop | Maintain consistent watering, avoid extreme temperature changes, and address any underlying environmental issues. |
| Root Rot | Ensure well-draining soil and proper watering practices; repot if root rot is detected. |
By being aware of these common problems and taking proactive measures, you can enjoy the beauty and benefits of Ficus virgata plants in your home or office. Remember to provide the right care, monitor your plants regularly, and address any issues promptly to ensure their long-term health and vitality.
Conclusion
In conclusion, caring for Ficus virgata plants, also known as rubber trees or fig trees, requires attention to detail and consistency. These popular houseplants thrive in bright, indirect sunlight and prefer moderate and consistent watering. It is important to allow the soil to dry partially before watering again.
Providing Ficus virgata with rich and well-draining soil is essential for their growth and health. Repotting in the spring can help avoid shock and promote optimal growth. Temperature is another crucial factor, as these plants are sensitive to cold drafts and extreme temperature changes.
While Ficus virgata can add beauty to any space, it’s important to keep them out of reach of pets, as they can be toxic if ingested or come into contact with sensitive areas of the body. Regular pruning and shaping can help maintain their desired form and encourage healthy growth.
Overall, with proper care and attention to their specific needs, Ficus virgata plants can thrive and bring natural beauty to any home or office environment. Remember to provide the right lighting, soil, and temperature conditions, as well as consistent watering and regular maintenance, for these stunning houseplants to flourish.
Make sure to check out our article on Ficus Fraseri Care Guide. And after reading that Ficus article, check out our article on Ficus Arnottiana Care Guide.
FAQ
Q: How often should I water my Ficus virgata?
A: Ficus virgata should be watered moderately and consistently when the soil has dried about 1/3 of the way from the tops. It’s important to avoid overwatering or underwatering.
Q: What kind of soil is best for Ficus virgata?
A: Ficus virgata prefer rich and well-draining soil. It’s important to use a soil mix that allows for proper drainage to prevent waterlogging.
Q: When should I repot my Ficus virgata?
A: It’s best to repot Ficus virgata in the spring to avoid shock. Choose a pot that is slightly larger than the current one, ensuring it has drainage holes to prevent water buildup.
Q: How much sunlight does Ficus virgata need?
A: Ficus virgata thrive in bright, indirect sunlight. They should be placed in a location that receives 3-6 hours of direct sunlight per day, with shade during the hottest parts of the day.
Q: Are Ficus virgata plants toxic?
A: Yes, Ficus virgata plants are toxic if ingested or come into contact with the skin, eyes, nose, or mouth. Keep them out of reach of pets and children.
Q: How can I promote growth in my Ficus virgata?
A: Shaking the Ficus trunk can simulate wind and stimulate thicker trunk and foliar growth. Additionally, provide proper care in terms of light, water, and temperature to encourage healthy growth.
Q: What pests should I be aware of with Ficus virgata?
A: Ficus virgata can be susceptible to spider mites. Preventative pest spraying is recommended. Care should also be taken when working with Ficus roots to avoid disturbing the root ball too much.
Q: Can Ficus virgata tolerate temperature changes?
A: Ficus virgata are highly sensitive to temperature changes and should be kept away from cold drafts or heating/cooling units. It’s best to maintain a consistent temperature for optimal growth.
Q: What are some popular varieties of Ficus virgata houseplants?
A: Some popular Ficus virgata varieties include Ficus altissima ‘Yellow Gem’, Ficus elastica ‘Burgundy’, Ficus pumila (Creeping Fig), Ficus benghalensis ‘Audrey’, Ficus lyrata (Fiddle Leaf Fig), Ficus elastica ‘Tineke’, and Ficus triangularis.
